Philips PERFECTCARE ELITE GC9600 Serie Mode D'emploi page 7

Using your appliance
Filling the water tank
Fill the water tank before every use and when the 'water tank empty' light
flashes.
Do not add perfume, water from the tumble dryer, vinegar, starch,
descaling agents, ironing aids, chemically descaled water or other
chemicals, as they may cause water spitting, brown staining or damage
to your appliance.
1 Remove the water tank from the appliance and fill it with tap water
up to the MAX indication.
Tip: Your appliance has been designed for use with tap water. If you live
in an area with very hard water, scale builds up quickly. In this case it is
recommended to use distilled water to prolong the life of your appliance.
2 Put the water tank back into the appliance by sliding in the bottom
part first. Then push the top part until it locks into place.
'Water tank empty' light
When the water tank is almost empty, the 'water tank empty' light goes on.
Fill the water tank and press the steam trigger to let the appliance heat up
again. When the 'iron ready' light lights up continuously, you can continue
steam ironing.
Optimal Temp Technology
The Optimal Temp Technology enables you to iron all types of ironable
fabrics, in any order, without adjusting the iron temperature setting.
Fabrics with these symbols are ironable, for example linen, cotton, polyester,
silk, wool, viscose and rayon.
Fabrics with this symbol are not ironable. These fabrics include synthetic
fabrics such as Spandex or elastane, Spandex-mixed fabrics and polyolefins
(e.g. polypropylene), but also prints on garments.
ENGLISH
7