Levoit Core 400S Smart True HEPA Serie Manuel De L'utilisateur page 9

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

USING YOUR PURIFIER (CONT.)
Sleep Mode
Sleep Mode operates quietly by using a fan
speed lower than low speed.
1.
Tap
to turn Sleep Mode on/off.
2. Sleep Mode will turn off the display after
3 seconds if no other buttons are tapped.
Note:
When the display is turned off, tap any
button (except
back on. If you don't tap another
button, the display will turn off again
after 3 seconds.
The Check Filter Indicator will still turn
on and stay on if it's time to check your
filter (see page 14).
Auto Mode
Auto Mode uses AirSight Plus, a smart laser
dust sensor inside the air purifier, to adjust
the fan speed automatically based on air
quality. For example, if the air quality is bad,
the fan will automatically be set to high
speed.
Air Quality Indicator Chart
Indicator
Colour
Quality
Blue
Very Good
Green
Good
Orange
Moderate
Red
Bad
) to turn the display
Air
Auto Mode
Fan Speed
Sleep Mode
Low
Medium
High
Note:
The air purifier will take 5 seconds
to detect the air quality each time
it is turned on. During this time, the
air quality indicator rings will be
blue. After 5 seconds, the air quality
indicator rings will change colour
based on the detected air quality.
Auto Mode does not use the Turbo
fan speed.
The VeSync app also supports
additional auto modes: Quiet Auto
Mode and Efficient Auto Mode (see
page 11).
PM2.5 Display
The PM2.5 value on the display shows the
amount of airborne particles (µg) that are
detected per 1 cubic metre (m³) of air volume.
PM2.5 refers to particulate matter (PM) that
is less than or equal to 2.5 microns (µm) in
diameter. These particles, also known as
"fine particles", are so small that they can only
be detected with an electron microscope,
and they stay in the air longer than heavier
particles such as dust and mould.
Your air purifier's AirSight Plus laser dust
sensor detects the amount of PM2.5 particles
that are in a given space (µg/m³). Generally,
the lower the number, the better your air
quality. A number above 115 indicates that
there is an unhealthy amount of fine particles
in the air.
EN
9

Publicité

Table des Matières
loading

Table des Matières