Getting Started - Levoit Core 400S Smart True HEPA Serie Manuel De L'utilisateur

G E T T I N G S TA R T E D
1. Flip the air purifier over or turn it on its
side. Twist the filter cover anticlockwise
and remove it. [Figure 1.1]
Figure 1.1
2. Remove the filter from its plastic
packaging and place the filter back into
the air purifier. [Figure 1.2]
Figure 1.2
3. Replace the filter cover and twist
clockwise to lock. [Figure 1.3]
Figure 1.3
4. Place the purifier on a flat, stable surface
with the display facing up. Allow at least
38 cm / 15 inches of clearance on all
sides. Keep away from anything that
would block airflow, such as curtains.
[Figure 1.4]
15 in /
38 cm
Figure 1.4
cover should
snap shut
15 in /
38 cm
EN
7