Roborock S7 Manuel De L'utilisateur page 19

Installation
Position the charging dock
1
Connect the power cable to the Charging Dock and tidy cables
mobile app, place the Charging Dock in an area with good WiFi
coverage.
More than 0.5m (1.6ft)
More than 1.5m (4.9ft)
Note:
front of the Charging Dock.
If the power cable hangs vertical to the ground, it may be caught by the robot, caus-
ing the Charging Dock to be disconnected.
the robot is charging.
not block the Location Beacon. Otherwise the robot may not be able to automatically
return to the Charging Dock.
Use double-sided tape to stick the Charging Dock down.
More than 0.5m (1.6ft)
Secure the charging dock with the
2
adhesive tape
placed with a dry cloth, then secure the dock in place using
double-sided tape at the bottom of the dock.
Note:
Use of the double-sided tape to secure the charging dock is optional.
When necessary, remove the double-sided adhesive tape slowly to reduce residue glue.