Models And Contents Of The Package - DEA SYSTEM LIVI 400 Notice D'emploi Et Avertissements

Operating instructions and warnings
WARNING Wrong assessment of impact forces may cause
serious damage to people, animal and things. DEA System re-
minds all personnel that the installer must ascertain that these
impact forces, measured according to EN 12445 prescriptions,
are actually below the limits indicated by EN14453 regulation.
WARNING In line with EU Directive 2002/96/EC for waste
electrical and electronic equipment (WEEE), this electrical pro-
duct must not be disposed of as unsorted municipal waste.
Please dispose of this product by returning it to your local
municipal collection point for recycling.
3 MODELS AND CONTENTS
OF THE PACKAGE
The name LIVI identifies a series of electromechanical opera-
tors with different features as to motor and control board power
supply voltage, range of built-in or external control board and
mechanical adjustment of force, electronic clutch and built-in
limit switch. DEA System articles in the series are listed in the
"AVAILABLE MODELS" table. LIVI is completed by a set of acces-
sories listed in the "PRODUCT ACCESSORIES" table.Inspect the
"Contents of the Package" on Page 30 and compare it with your
product for useful consultation during assembly.
4 OPERATING INSTRUCTIONS
In compliance with Directive 2006/42/CE Enclosure I, Point
1.7.4.
4.1 Product description
LIVI is an electro-mechanical operator designed for the
automation of sliding gates. LIVI is basically made up of a
mechanical gear motor (vedi F1 pag. 30) rotating the draft
gear that, in association to a properly installed rack, converts
the circular movement of the gear motor into straight-line
movement, thus allowing the gate to move in its own slide.
4.2 Technical data
See the "TECHNICAL DATA" table.
4.3 Labelling information
Part of the summarised data for the CE label are listed in the
label applied to the product (see Position F5, Page 30); the data
regarding the seller are found in the enclosed Warranty, whi-
le "Indispensable Operating Safety Elements" are found under
Point "4.2 Technical data".
8
"TECHNICAL DATA" table
Single-phase power supply
380/220 V ~ ±10% (50/60 Hz) - 24 V
Absorber power (W)
Built-in capacitor (µF)
Work cycle
Max Thrust (N)
Weight of product (Kg)
Operating temperature range (°C)
Motor thermal protection (°C)
Speed (m/min)
Degree of protection
Overall dimensions
L I V I
voltage (V)
230 V ~
320
8
45s-1s-45s x5
times
90 min PAUSE
340
11
140°
10
IPX4
"PRODUCT ACCESSORIES" table
Article
Code
111
619000
112
126001
113
126000
460
619010
"AVAILABLE MODELS" table
Power
supply
tension
400 230 V ~
6RR 230 V ~
800 230 V ~
9RR 230 V ~
804 230 V ~
805RR 230 V ~
5/24RRB 230 V ~
5/24RRB/F 230 V ~
8/24RRB 230 V ~
8/24RRB/F 230 V ~
403E 230 V ~
803E 230 V ~
230 V ~ 230 V ~
450 350
12,5
45s-1s-45s x8 45s-1s-45s x6
times times
90 min PAUSE 100 min PAUSE
490 275
12,5
-20 ÷ 40
160°
10,8
see F2 Pag. 31
Description
Nylon rack
Zinc plated rack
22x22
Zinc plated rack
30x12
Foundation base
to be cemented
400 NO MEC NO NO
600 YES ELE YES NO
800 NO MEC NO NO
900 YES ELE YES NO
800 NO MEC NO NO
800 YES ELE YES NO
350 YES ELE NO YES
350 YES ELE NO YES
600 YES ELE NO YES
600 YES ELE NO YES
400 YES ELE NO NO
800 YES ELE NO NO
24 V
80
-
45s-1s-45s x5
times
5 min PAUSE
210 260
12
-
10 8,2