cecotec ENERGYSILENCE 12000 AIR CLIMA CONNECTED Manuel D'instructions page 44

ENGLISH
The air conditioner is programmed for comfortable and suitable living conditions as below.
If used outside the conditions, certain safety protection features might come into effect.
Temperature / Mode Cooling operating
Room temperature 17 ºC~32 ºC
Outdoor temperature 15 ºC~53 ºC
Emergency function
If the remote controller fails to work or maintenance is necessary, proceed as following:
Open and lift the front panel up to an angle to reach the emergency button.
Press the emergency button once, the unit will operate in cooling mode. Press again within 3
seconds, the unit will operate in heating mode. Press a third time after 5 seconds, the unit will
turn off.
The emergency button is located on the E-box cover on the unit, under the front panel.
Fig. 35.
Auto-restart function
The appliance is designed with an auto-restart function. In case of a sudden power failure, the
device memorises the settings before the power failure. When the power restores, the unit will
restart automatically with the previous settings preserved by the memory function.
6. CONNECTIVITY
1. Wi-Fi module specification and basic information
1.1.
Minimum requirements for a Smart phone:
Android 5.0 version or higher
IOS 9.0 version or higher
1.2. Basic parameters
Network frequency: 2.400 - 2.500GHz
WLAN Standards: IEEE 802.11 b/g/n (channels 1-14)
Protocol stack support: IPv4/IPv6/TCP/UDP/HTTPS/TLS/MulticastDNS
Security support: WEP/WPA/WPA2/AES128
Network type support: STA/AP/STA+AP
1.3.
Wi-Fi module location and appearance in indoor unit.
Open the front panel, the Wi-Fi module should be by the electric box cover or on the panel.
84 ENERGYSILENCE 12000 AIR CLIMA CONNECTED
Heating operating Drying operating
0 ºC~30 ºC 17 ºC~32 ºC
-20 ºC~30 ºC 15 ºC~53 ºC
2. Download and install the App
For Android
Method 1: Scan the QR code and then download and install the App.
Method 2: Open Google's "Play Store" on your smartphone and search "Smart Life", then
download and install the APP.
For IOS
Method 1: Scan the QR code and then download and install the App.
Method 2: Open Apple's "App Store" on your smartphone and search "Smart Life", then
download and install the APP.
Note:
Enable the permissions of storage, location and camera for this App when installing, otherwise
it will have some problems when operating.
3. Activate App
Note: When the App is used for the first time, it will need to be activated.
3.1.
Open the App "Smart Life" on your smartphone.
3. 2.
Method 1: Tap on the "Scan" button and scan the Activate QR code
Method 2: Tap on on "Enter Activation Code" in bottom of the screen, then enter the activating
code and tap on "CONFIRM".
4. Registration
1. If you have not created any account yet, tap on the "Register" button.
2. Read the Privacy Policy and tap on the "Agree" button.
3. Tap on ">" and choose the country.
4. Introduce your phone number or e-mail address.
5. Tap on the "Obtain verification code" button.
6. Enter the verification code, received from a phone message or an e-mail.
7. Set the Password with 6-20 characters including letters and numbers.
8. Tap on "Done".
5. Login
Note: When using the App for the first time, "Create family" will be needed:
1.Tap on on "Log in with existing account".
2. Enter your registered account and password.
ENGLISH
ENERGYSILENCE 12000 AIR CLIMA CONNECTED 85