cecotec ENERGYSILENCE 12000 AIR CLIMA CONNECTED Manuel D'instructions page 47

ENGLISH
and then tap on Save.
4.The timer will appear on the Timer main screen.
Timer management
1. Change the Timer setting:
Tap anywhere, except on the switch bar to get into the Timer setting screen, change the setting
and then tap on Save.
2. Enable or Disable the Timer:
Slide left part of the switch to disable the Timer.
Slide right part of the switch to enable the Timer.
3. Delete the Timer:
Slide the Timer's bar from right to left until the Delete option appears, then tap on Delete.
More functions
1.Tap on More to choose additional functions.
2. Tap on Display to switch on/off the indoor LED display.
3. Tap on Buzzer to switch on/off the buzzing when operating through the Wi-Fi APP.
4. Tap on Anti-Mildew to activate the Anti-Mildew function. The device will start drying, reducing
the residual moisture and prevent moulding. After this function finish, it will automatically turn
off.
5. Tap on Health to switch on/off the healthy function.
It will activate the antibacterial ioniser function. This function is only available for devices with
the ioniser generator.
6. Tap on GEN Mode. In this mode, you can choose one of the three levels of air flow.
The air conditioner will operate while saving energy.
7. Tap on Electricity Monitoring.
In this function, you can monitor the air conditioner electricity consumption.
8. Tap on Self-Cleaning.
Check the details of the Self-Cleaning function on the user manual.
9. Tap on 8 ºC Heat.
This function helps keeping the room temperature over 8.
Check the details of the 8 ºC Heat function on the user manual.
10.Tap on Reservation.
You can set the time, number of days, temperature, mode, fan speed, air flow as you desire
and then tap on Save to activate the function.
The air conditioner will automatically reach your settings at the appointed time.
11.Tap on Self-diagnosis.
The air conditioner will automatically self-diagnosis, indicate the Error code and the problem
instructions if possible.
90 ENERGYSILENCE 12000 AIR CLIMA CONNECTED
12. Tap on Electricity Management if it is available on the screen.
Device details and management
Tap on the pencil when in the first display or tap on "..." when using the second display for
opening the device details screen.
Here you can get some useful information and share the device with other accounts.
Check the following pictures and instructions carefully.
How to share the devices to other accounts
1. Tap on Device Sharing.
2. Tap on Add Sharing.
3. Select your region and enter the account with which you want to share the device.
4. Tap on Completed. The account will appear on your sharing list.
5. The receiving members should tap and press the home screen button and slide down to
refresh the device list. The device will appear on the device list.
Home management
1.Tap on My Home on the left upper corner of the Home Screen and select the Home
Management.
You can also tap on Me on the right lower corner and tap on Home Management.
2. Tap on one of the families in the family list and to open the Family Settings display.
3. Set your family following these steps.
Notice
1. Smart air conditioner App can be updated without notice for quality improvement and also be
deleted, depending on the circumstances of manufacturing firms.
2. In case Wi-Fi signal strength is weak, the Smart App may be disconnected. Make sure the
indoor unit is close to a wireless router.
3. DHCP server function should be activated when using a wireless router.
4. Internet connection may fail because of a firewall problem. In this case, contact your internet
service provider.
Troubleshooting
Description
1. Air conditioner can't be set successfully.
2. Smartphone can't control the air conditioner.
3. Smartphone can't find the air conditioner.
Analysis of cause
1. 1. Check that the Wi-Fi address and password are correct.
1. 2. Check the configuration status of the air conditioner.
ENGLISH
ENERGYSILENCE 12000 AIR CLIMA CONNECTED 91