Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

5.3 Operating

Connect the device to a single, grounded outlet.
The green control light will come on.
The ventilator will come on and work without interruption. In the „O" position (OFF),
the thermostat only turns off the compressor.
The temperature in the device is regulated by a thermostat. The thermostat is turned
off when in the „O" position. The temperature drops when the thermostat dial is
turned clockwise.
NOTE!
Initially set the thermostat to „3", then in the event of too low temperatures from
„1-3", or too high temperatures „3-5".
During first use wait for the device to achieve the selected temperature before
placing food or beverages inside. This should take about 2-3 hours.
User tips
When placing items inside, ensure that air can circulate freely inside the device.
The more items in the refrigerator and the longer the door is kept open, the greater
the energy use and risk of malfunctioning.
To reduce loss of cold, keep the door open for just a short time and open them only
infrequently.
Products stored inside should be cooled in advance to the required temperature.
Placing warm products into the refrigerator can negatively impact the device's
functioning and products already cooled. Do not store products in warm areas, in
order to avoid loss of cold while placing them in the refrigerator.
In the event of a malfunction do not open the door, in order to retain cool air inside.
The refrigerator should not be left without power for longer than 10 minutes.
After a power outage or disconnecting the refrigerator, do not connect the device to a
power supply for at least 5 minutes.
- 33 -

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

700.321

Table des Matières