•
Loosen the screws (12) and remove the door handle (13).
•
Mount the door handle (13) to the opposite side of the door. Cover the screw
openings with expanding roundels.
Refrigerator for bottles 700.321 (fig. 7)
•
Unscrew both screws (7) and remove the
lower hinged handle (8) along with rings
(6) on the bolt and the seals (5).
•
Unscrew the screws (7) and remove the
hinged handle (11).
•
Remove the door (4).
•
Unscrew the bolt (2) from the upper
hinged handle with the nut (1) and rings
(3) and mount the entire set on the other
side of
the door.
•
First, turn the door 180 º and then slide
the upper bolt into the door, then hang it.
•
Loosen the screws (12) in the doors and
remove the door handle (13).
Mount the door on the opposite side.
Cover the screw openings with expanding
roundels.
•
The plate (10) remains in place.
•
First slide the bolt into the door, then
mount the lower hinged handle (8) with the
set of nuts and seals on the opposite side.
•
Turn the hinged handle (11) to the other side of the device.
- 32 -
Fig. 7