Danby DPA100E1BDB Mode D'emploi page 6

Indicators on the LED
Temp./Timer Display
The temperature setting, from 18°C (64°F)
32°C (90°F) or the timer setting from 0 to
24 hours in one hour increments.
MODE Display
Displays the current selected mode.
Including COOL, DRY and FAN.
How to use the Buttons
3
2
2
1
Cooling Operation
Ensure the unit is plugged in and has power.
1. Press the M button to select COOL mode ( indicator will
appear).
2. Use the up and down arrows to select the desired tempera-
ture. The temperature can be set within a range of 18°C (64°F)
to 32°C (90°F) in 1°C (1°F) increments.
3. Press the
mum, medium and minimum.
1
Fan Operation
Ensure the unit is plugged in and has power.
1. Press the M button to select FAN mode (
pear).
2. Press the
mum, medium and minimum.
NOTE
In FAN mode, the temperature setting is not displayed and you
are not able to control the room temperature either.
Temperature Symbol: Indicates if
temperature is in °C or °F
FAN SPEED Display
Displays the selected fan speed:
Maximum, Medium and Low.
button to select one of the 3 fan speeds, Maxi-
button to select one of the 3 fan speeds, Maxi-
5
TIMER Display
This display area shows the
TIMER settings.
indicator will ap-