Threading The Machine (2 Threads) - Janome 1110DX Pro Livret D'instructions

q
q

Threading the Machine (2 threads)

Using the needle on the right only
(for regular two-thread serging)
When you use the right needle, the standard sewing width
is 3.5 mm.
The illustration on the left shows you how to thread the
needle.
Note:
Tighten the needle clamp screw on the side that is not
being used to prevent losing the screw.
q Spreader
w
w Changeable thread guide: 2
Using the needle on the left only
(for wide two-thread serging)
When you use the left needle, the standard sewing width
is 5.7 mm.
The illustration at left shows you how to thread the
needle.
q Spreader
w Changeable thread guide: 2
w
66