Direct MX BMT 750 Traduction De La Notice Originale page 33

- Fill a small spoon full of 2-stroke mixture into
the spark plug opening and slowly pull the
starter cord several times. Thus, soot deposits
are blown out, and both piston and cylinder are
lubricated.
- Check the spark plug and replace it if the
hazards.
Restart after a longer operational break
1 Remove the spark plug.
2 Quickly pull the starter cord several times in
order to remove oil and deposits from the engine
compartment.
3 Check the spark plug and replace it, if
necessary. Insert the spark plug if it is ok.
mixture.
- Start the engine as described under "Starting
the cold engine".
T T Techni Technical data cal data
Air-cooled 2-stroke engine
Displacement:
Power:
Idle speed of engine:
Max. speed of double string:
Tank capacity:
Cutting width:
String thickness:
Spark plug:
Weight (empty tank):
Sound pressure level L :
pA
Sound power level L :
wA
Vibration a :
hv
3
25 cm
0.75 kW
3000 rpm
9000 rpm
500 ml
380 mm
2.0 mm
L8RTC
5.0 kg
97 dB(A), k=3 dB(A)
109 dB(A), k=3 dB(A)
2 2
7.556 m/s ; k=1.5 m/s
The operating noise may exceed 85 dB. Please
always wear ear protection.
Repair Repair
Only use accessories and spare parts
recommended by the manufacturer. In case of
failure of the device despite our quality controls
and your care, only authorised electricians are
permitted to repair the device.
Disposal and recycling Disposal and recycling
In order to avoid damage during transport, the
device is packed. This packaging consists of raw
materials and can thus be reused or recycled.
The device and its accessories consist of several
materials such as metal and plastic. Defective
parts must be disposed of as special waste.
Contact your specialised dealer or your local
government for further information.
33