Sharp HT-SB150 Mode D'emploi page 9

LINE IN
A. Use a RCA to 3.5mm audio cable (not
included) to connect the TV's audio
output sockets to the LINE IN socket
on the unit.
B. Use a 3.5mm to 3.5mm audio cable
(not included) to connect the TV's
or external audio device headphone
socket to the LINE IN socket on the
unit.
TIP:
When you use the headphone output on
the TV set, you will be able to adjust the
volume level directly using the TV remote
control.
EU
ARC
UK
Connect to Power
• Before connecting the AC power cord,
ensure you have completed all other
connections.
• Risk of product damage! Ensure that
the power supply voltage corresponds
to the voltage printed on the back or
the underside of the unit.
• Connect the mains cable to the AC
IN Socket of the unit and then into a
mains socket.
Basic Operation
Standby/ON
• When you fi rst connect the unit to the
main socket, the unit will be in STAND-
BY mode.
• Press the
button on the remote cont-
rol to switch the main unit ON or OFF.
OPTICAL LINE IN UPGRADE
~AC IN
• Disconnect the main plug from the
main socket if you want to switch the
unit off completely.
– When the unit has no input signal for
over 15 minutes, it will automatically
switch to Standby mode.
Select Modes
Press the button on the unit
repeatedly or press the
the remote control to select the desired
mode.
Adjust the Volume
– Press the + / - buttons on the unit or
on the remote control to adjust the
volume.
– If you wish to turn the sound off , press
the button on the remote control.
Press the button again or press the
+/- buttons on the unit or on the remo-
te control to resume normal listening.
Select Equaliser (EQ) Eff ect
• While playing, press the EQ button on
the remote control to select between
preset equalisers: Music - Eq1 appears
on the display (recommended for
listening to music), Movie - Eq2 appears
on the display (recommended for view-
ing movies), NEWS - Eq3 appears on
the display (recommended for listening
to NEWS), Cust - Cust appears on the
display (recomended for personal bass/
treble settings).
NOTE: Bass/Treble setting is
available only in custom preset.
LINE IN/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to
the TV or audio device.
2. While in ON mode, press the
button on the unit repeatedly to select
the desired mode.
3. Operate your audio device directly for
playback features.
EN
/ button on