Axis Q7404 Mode D'emploi page 13

Specifications
To find the latest version of the product's datasheet, go to axis.com > [product] > Support &
Documentation.
LED indicators
LED Color
Net- Green
work
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Note
This AXIS product has four Status LED indicators, one for each video channel. The indicators
are ordered as follows (from left to right): Power, Status 1, Status 2, Status 3, Status 4,
Network.
Connectors
Network connector
RJ45 Ethernet connector.
Audio connector
The Axis product has the following audio connectors:
• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel
is used from a stereo signal).
• Audio out – 3.5 mm output for audio (line level) that can be connected to a public
address (PA) system or an active speaker with a built-in amplifier. A pair of headphones
can also be attached. A stereo connector must be used for audio out.
Indication
Steady for connection to a 1000 MBit/s network. Flashes for network
activity.
Steady for connection to a 10/100 MBit/s network. Flashes for network
activity.
No network connection.
Steady green for normal operation.
Steady during startup, during reset to factory default or when restoring
settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
AXIS Q7404 Video Encoder
13
EN