Caso Germany PRO3000 Mode D'emploi page 16

Problem and Solution
Error Code
E01
E02
E03
E05
E06
E07
E08
Disposal
Dispose of the packaging in the proper manner.
If at any time in the future you should need to dispose of this product please note that
Waste electrical products should not be disposed of with household waste. Please
recycle where facilities exist. Check with your Local Authority or retailer for recycling advice.
(Waste Electrical and Electronic Equipment Directive)
Cause
Supply voltage too low
(< 160 V)
Supply voltage too high
(> 270 V)
Possible short circuit
Overheat protection (in
power mode)
Temperature sensor
defective
Overheat protection (in
temperature mode)
Temperature sensor
malfunction
16
Solution
Ensure that the supply
voltage matches the voltage
shown on the type plate of
the device.
Ensure that the supply
voltage matches the voltage
shown on the type plate of
the device.
Please send the device to
customer service.
Remove the cookware and
allow the device to cool
down. Then turn the device
off and on again.
Please send the device to
customer service.
Remove the cookware and
allow the device to cool
down. Then turn the device
off and on again.
Please send the device to
customer service.