Quintezz Drive Control Mode D'emploi page 13

First, you need to enter the first digit. You can set the digit with the VOL + and VOL – key. To confirm the digit, you need to press the
red button. Once all 4 digits are confirmed, the Radar Detector will be switched on, or you will receive a message 'SN Fail'.
To make sure your secret code remains secret, we suggest that you remove the last 4 digits from the serial number label, and store
the information in a safe place.
4.2.10 0.0 INDICATION
When the product is not used, the display shows 0.0. This is the ODO meter. It shows the total traveled distance. To reset the
Odometer to 0.0, press the red button.
4.2.11 AVG INDICATION
This display indicates the average speed of your trip after switching on the unit. When you switch off the unit, your average speed
will automatically be reset.
4.2.12 U: KILO / MILE
The following display appears once the speed indication menu is accessed:
With this indication you can choose whether your speed needs to be indicated in Kilometers/hour or Miles/hour.
4.2.13 GMT SETTING
The satellites broadcast the time based on GMT (Greenwich mean time). This time is not changed automatically from summer
into winter time. To adjust the time to your region / season, you have to increase or decrease the hours. E.g. to set the unit to
Amsterdam / Brussels / Paris summertime, you have to set this to 2.
4.2.14 U1 LON ..... LATT ......
You can save your own locations into the DRIVE CONTROL. The DRIVE CONTROL will give a warning once you reach these locations.
In this menu, you can see the coordinates of your own stored locations.
4.2.15 SOFTWARE VERSION
The following display appears once the software version menu is accessed:
This display shows you the current version of the software.
4.2.16 DATE OF DATABASE
The following display appears once the date of database menu is accessed:
This display shows you the date when the database was last updated (DD/MM).
-GB-8-