Zibro SRE346E Manuel D'utilisation page 43

7 Transportation costs and the risks involved during the transportation of the
heater or heater components shall always be for the account of the purchaser.
In order to avoid unnecessary costs, we recommend that you always read the
'Directions for Use' carefully first. In case they offer no solution, please take the
heater to your dealer for repair.
* Highly inflammable substances may induce uncontrollable burning, causing flames to break out. Should this
happen, never try to move the heater, but always switch off the heater immediately. In case of emergency you
may use a fire extinguisher, but only a type B extinguisher: a carbon dioxide or powder extinguisher.
11 TIPS FOR SAFE USE
1 Children should be supervised to ensure that they do not play with the
appliance.
2 Do not move the heater when it is burning or still hot. Do not refill nor
service the heater when it is burning or still hot.
3 Position the front of the heater at a distance of minimum 1.5 metres
from walls, curtains, and furniture.
4 Do not use the heater in dusty rooms. You will not have optimum
burning in such rooms. Do not use the heater in the immediate
surrounding of a bath, a shower or a swimmingpool.
5 Switch off the heater, before you leave or go sleeping. Unplug the
heater as well, when you go away for a longer period of time
(e.g. holidays).
6 Store and move fuel only in suitable tanks and jerrycans.
7 Make sure that the fuel is not exposed to heat or extreme temperature
changes. Always store the fuel in a cool, dry and dark place (sunlight
will affect the quality).
8 Never use the heater in places where harmful gasses or fumes may be
present (e.g. exhaust gasses or paint fumes).
9 Beware that the grid of the heater becomes hot. If the appliance is
covered there is a risk of fire.
10 Always make sure that there is sufficient ventilation.
11 This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
Defective electrical devices and batteries must be kept separate from household
waste. Ensure that there is effective recycling where possible. Ask you local council
or dealer for expert advice on recycling.
4
84
p074_087_uk_SRE346E.indd 84-85
Q
WEEKTIMER
Here is an example on how the week timer can be programmed:
Monday Tuesday Wednesday Thursday
P1 ON 6:30 6:30 6:30 6:30
P1 OFF 8:45 8:45 8:45 8:45
P2 ON 12:00 15:00 18:00 12:00
P2 OFF 14:00 23:00 23:00 14:00
P3 ON 18:00 18:00
P3 OFF 23:00 23:00
• Maximum of 3 programs per day can be set.
• Every day of the week can be programmed separately.
• Minimum switching interval, 1 hour.
• Minimum activation time, 1 hour.
• Choice between manual and timer
• Settings are saved in the memory and remain saved without power supply.
PROGRAMMING THE WEEK TIMER
Make sure the heater is connected to the
mains and not burning. Press the timer-key
P. Also make sure the time and day are set
correctly. Choose the day you would like to
program by pressing the adjustment keys
O. Press the adjustment key M to increase
the day by one step and press the key N to
decrease the day.
Press extension/day/set S to select the
desired day. The display shows:
With the adjustment keys M and N O you
can choose between the programs P1, P2
and P3. You can also choose the option
Copy to copying the setting from one day to
another. Press extension/day/set S to select
the displayed program.
Use the adjustment keys O to set the hour
at which the heater must ignite. Press the
adjusment key M to increase the hour
and the key N to decrease the hour. Press
extension/day/set S to select the right hour.
Friday Saturday Sunday
6:30 10:00 9:00
8:45 23:00 23:00
12:00
14:00
18:00
23:00
4
85
16-05-11 10:39