Technical Data Of The Berger Powerstation; Scope Of Delivery; Transport - Berger Powerstation BPS600 Manuel D'utilisation

5. TECHNICAL DATA OF THE BERGER POWERSTATION

Description
Output power
Peak power
Output voltage AC
Output waveform
Output voltage DC
Battery capacity
Battery type
Charging time
Charging voltage
Car and solar charging
Protection
Working temperature
LED light
Dimensions (WxDxH)
Net weight

6. SCOPE OF DELIVERY

BPS600 Powerstation
Charging adapter
Charging cable
Accessories bag
User manual

7. TRANSPORT

Since a lithium battery is permanently installed in the Berger Powerstation BPS600, the
regulations for lithium batteries also apply. When transporting lithium batteries, always
observe all national and international regulations and laws. Transport may only take place in
the original packaging or packaging corresponding to this. Never transport damaged LiFe-
PO4 batteries; this may only be done in prescribed containers. LiFePO4 batteries installed in
devices will be damaged during transport.
BPS600
600 W
1200 W
2 x AC 230 V / 50 Hz ± 5 %
Pure sine wave
DC 12 – 14 V / 10 A; 2 x USB QC3.0 (5V / 3A, 9 V / 2.5 A);
2 x USB-C x 2 (5 – 9V / 3 A, 12 V / 2.25 A)
578 Wh (25.2 V / 22.95 Ah)
Lithium-Ionen
2 – 3 h
DC 29.4 V / 9 A (MAX)
DC12 V cigarette lighter / 18 V solar panel (The open-circuit vol-
tage is 22 V and the maximum power consumption is 100 W).
Overvoltage, undervoltage, overtemperature,
overload, AC short circuit
LED 2 W
280 x 152 x 225 (mm)
5,9 kg
GB
19