Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS
1) Make sure the Gate is closed before filling hopper.
2) Fill hopper with material.
3) Place shoulder strap over shoulder. Place unit on chest and adjust the strap.
4) Select spreader setting 1-6 to set size of gate (Fig. B).
5) Crank the handle maintaining a steady clockwise motion and walk a consistent
pace to spread the material evenly. Squeeze handle to open the gate.
6) Adjust side baffle as needed (Fig. D).
7) Adjust Gate location as needed (Fig. D).
8) To close the Gate, simply release handle.
FIGURE C
SPREADER SETTINGS:
Material Type
Fine
Grass Seed
Coarse
* Due to the variables involved, these settings arre intended for reference only.
(Gate Location)
Spreader Setting*
4
5
2E
FIGURE D
FIGURE B
(Spreader Settings)
Side
Baffle
Gate
Control
Publicité
