Tv Format; Set To Factory Default; System Version - Conrad 75 18 00 Notice D'emploi

f) TV format
g) Set to factory default
h) System version
42
Use the "left" and "right" buttons G G D D (D, J) on the
remote control to select the required TV format.
Then press the "OK" button
In Europe, "PAL" is usually correct.
You may restore the factory settings with this menu.
Please note that any settings made so far are
lost when factory settings are restored.
More information on receiver (=screen; RX) and
transmitter (cameras; TX1 – TX4)
(E) to confirm.