Overview; Included; Installation - Resol VBus/BACnet Manuel

1

Overview

• Access to the controller via BACnet
• Comfortable system parameterisation via the RESOL RPT Parameterisation
Tool possible
• Suitable for all controllers with VBus
• Software updates
Technical data
Housing: plastic
Protection type: IP 20 / EN 60529
Protection class: III
Ambient temperature: 0 ... 40 °C
Dimensions: 95 × 70 × 25 mm
Mounting: wall mounting (optional)
Display: operating control LED
Interfaces: VBus ® for the connection to the controller, 10/100 Base TX Ethernet,
Auto MDIX
Power consumption < 1.75 W
Power supply:
Mains adapter: 100 – 240 V~, 1A / 12 V ⎓ , 1 A (Level 6)
Interface adapter: 12 V ⎓ ± 5 %, 100 mA
Electrical energy source: ES1 (EN 62368-1)
Electrical power source: PS1 (EN 62368-1)
Thermal energy source: TS1 (EN 62368-1)
Mechanical energy source: MS1 (EN 62368-1)
Use mains adapter in dry Mains adapter protection
interior rooms only.
class: II
®
Coaxial connector polarity:
Internal: plus
External: minus (GND)
2

Included

1
2
3
If one of the items mentioned below is missing or defective, please contact your
distributor:
1 Interface adapter, mains adapter and VBus
2 Interchangeable mains adapter plugs (EURO, UK, USA, AUS)
3 Network cable (CAT5e, RJ45), 2 m
4 Wall plugs, screws and rubber pads
5 Terminal block for extending the VBus
Manual (not illustrated)
3

Installation

ATTENTION! ESD damage!
Electrostatic discharge can lead to damage to electronic compo-
nents!
Î Take care to discharge properly before touching the
inside of the device! To do so, touch a grounded surface
such as a radiator or tap!
The device comes with a VBus ® cable already connected to the device.
The housing does not have to be opened in order to mount the device.
Initial commissioning must be effected by authorised skilled personnel.
5
4
® cable pre-connected
® cable
19