Multipurpose Blade Assembly - KitchenAid KFP710 Instructions Et Recettes

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Preparing the Food Processor for Use
WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
4. Insert the desired blade or disc into
the work bowl. See blade or disc
assembly instructions.
5. Place the work bowl cover on the work
bowl with the feed tube just to the left
of the work bowl handle. Grasp the
feed tube and turn the cover to the
right until it locks into place.
NOTE: To avoid damage to the work
bowl, do not attach the cover to the work
bowl before the work bowl is locked on
the base.
6. Fit the food pusher into the feed tube.
WARNING
Fire Hazard
Do not use an extension cord.
Doing so can result in death
or fire.
7. Plug the power cord into an electrical
outlet.
NOTE: Your Food Processor will not
operate unless the work bowl and work
bowl cover are properly locked on
the base.
To avoid damage to the work bowl, do
not remove the work bowl from the base
without first removing the work
bowl cover.

Multipurpose Blade Assembly

WARNING
Cut Hazard
Handle blades carefully.
Failure to do so can result in cuts.
1. Place the blade on the power shaft.
2. Rotate the blade so it falls into place
on the shaft.
8

Publicité

Table des Matières
loading

Table des Matières