Husqvarna TE 250 2009 Livret D'utilisation Et D'entretien page 116

MUM1-250_310_450_510_2009_GB
ENGINE START (TC-TXC)
Proceed as follows:
1) make sure the fuel tap (A) is in the Open position;
2) shift gear pedal (1) in neutral positio.
A
TC
1
24
21-05-2008 9:28 Pagina 24
3) pull the starter knob (BLACK knob 2 for cold starting*,
RED knob 3 for warm starting)
*: after a prolonged inactivity of the motorcycle or in presence of
a low external temperature.
2
TXC
3
4) lower the starter pedal (4) until a certain resistance is no-
ticed (piston at T.D.C.);
4
TC-TXC