Demolition And Disposal - CASATELLI LEONARDO 8ET Généralités - Avertissements - Installation - Entretien

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

Burn pot
Ash drawer/compartment
Glass
Boiler
Resistance sleeve
Fumes manifold
Door seals and burn pot*
Smoke exhaust duct*
Fans*
To be performed by a qualified technical support centre.
(*)
At least once a year or every 4 tonnes of burnt pellets.
(a)
7

DEMOLITION AND DISPOSAL

The responsibility for the demolition and disposal of the stove is the exclusive responsibility of the owner who
must act in compliance with the laws on safety, respect and protection of the environment, in force in the country
where the fireplace is installed.
Decommissioning and disposal can be entrusted to a third party, provided to always use companies authorised
for recovery and elimination of the materials in question.
INDICATION: follow always and in any case the regulations in force in the country where the fireplace is installed
for the disposal of materials and possibly for the disposal report.
ATTENTION: All disassembly operations for the demolition must take place when the fireplace is off and the
power supply disconnected.
remove the entire electric system;
separate the accumulators in the electronic cards;
the demolition of the stove's structure should be carried out by authorised companies;
ATTENTION: Dumping the stove in accessible areas poses a serious risk for people and animals.
Any liability for damage to people and animals always falls on the owner.
At the time of demolition, the CE marking, this manual and any other documents relating to this fireplace should
be destroyed.
The crossed-out wheelie bin symbol that appears on the label of the appliance
indicates that the product at the end of its useful life must be disposed of separately
from other waste.
Pursuant to art.13 of Italian Legislative Decree no. 151 of 25 July 2005 implementing
the Directive 2002/96/EC of 23 February 2003 on Waste Electrical and Electronic
Equipment relating to the measures and procedures designed to prevent the
production of waste electrical and electronic equipment, called WEEE, promoting
the reuse, recycling and other forms of recovery so as to reduce the quantity to be
disposed of and improving the intervention of the parties involved in the life cycle of
such products.
38
INSPECTION AND MAINTENANCE SCHEDULE
EACH
EACH
IGNITION
WEEK
X
X
X
X
004778330 - 16/07/2020
1
3
MONTH
MESI
YEAR
X
X
1
(a)
X
X
X

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Leonardo 9et

Table des Matières