Getting Started - Lindemann LIMETREE BRIDGE Mode D'emploi

22 EN

GETTING STARTED

• You need a network router with the latest firmware. Ideally it
should support the 802.11a/b/g/n/ac WLAN standard as well
as WPS.
• Your internet connection should provide at least 16 Mbit/s.
• With WLAN operation the signal strength at the setup location
must be good or very good.
• You need an up-to-date smartphone or tablet with the
LINDEMANN app installed on it. The app is available at
the app store for iOS or at Google Play for Android.
Caution: The functions and settings of the Limetree NETWORK
can only be operated via the LINDEMANN app!
The LINDEMANN app for iOS and Android turns your smart-
phone or tablet into a practical remote and thus allows a conve-
nient and intuitive control of almost all functions of the Limetree
BRIDGE.
For a detailed description of the app and more
information please visit our website:
www.lindemann-audio.com
LAN cable operation
Link your router to the network bridge with the included
LAN
LAN cable. The wall plug transformer is connected to
the "5V DC" supply socket of the network player and to a mains out-
let. Now turn on the Limetree BRIDGE. The device will log onto the
network for the first time. Here you'll need to have a little patience:
this procedure may last some time.
Now connect the network bridge to your D/A converter.
Open the LINDEMANN app on your smartphone/tablet. Under "De-
vices" select the network player as your playback device and you're
done! Select the desired source and start browsing.
TOP h TOP h