Use Of Your Product; Use Of Gas Burners - Westline WGE 4 WH Notice D'utilisation

4. USE OF YOUR PRODUCT

4.1 Use of gas burners

Ignition of the burners
To determine which knob controls which burner, check the position symbol above the knob.
Electrical Ignition
Electrical ignition of gas burners can be performed in two ways; depending on the configuration of
your appliance.
Ignition by Hob Control Knob: Press the hob control knob of the burner you want to operate and
turn the hob control knob in the counterclockwise direction so that the knob is in maximum
position while keeping the knob pressed. The spark plugs will generate sparks as long as you keep
the control knob pressed. The micro switch placed under the knob will automatically create sparks
through the spark plug of the burner. Continue pressing the knob until you see a stable flame on
the burner.
Flame safety device:
Hob Burners
Hobs equipped with flame failure device provide security in case of accidentally extinguished flame.
If such a case occurs, the device will block the burners gas lines and will avoid any accumulation of
unburned gas. Wait 90 seconds before re-igniting an extinguished gas burner.
14