Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.
USAGE INSTRUCTIONS
WARNING!
Please follow the general warnings and safety precautions listed in
the previous chapter and please comply with them strictly.
WARNING!
Any operations other than the ones listed here should be performed
by qualified technician.
6.1.
Control panel explanation
6.2.
Display explanation
HIGH TEMP indicator: When the setting temperature exceeds 50 °C, it lights up to
1
remind you that the outlet temperature is too high for direct spray.
FILL WATER indicator: When the power supply is turned on, it lights up to remind you to
2
re-affuse water.
ALARM indicator: it flashes continuously at malfunctioning or protection time. .
3
TEMP-SET indicator: it shows the setting temperature at blank during screen protection.
4
Codes are shown at malfunctioning or protection time.
LOCK indicator: when the user interface is locked, it always lights.
5
Water temp. indicator: when the actual water temperature exceeds 60 °C, it lights up.
6
Water temp. indicator: when the actual water temperature exceeds 50 °C, it lights up.
7
Water temp. indicator: when the actual water temperature exceeds 40 °C, it lights up.
8
OUTLET TEMP indicator: it displays water temperature of the upper part of the tank,
9
which can be used. It always lights.
TIMER CONFLICT indicator: When the temperature you set through Wired Controller
10
1
2
16
15
14
13
12
Display
Operation
3
4
9
10
11
5
6
7
8
Publicité
Chapitres
Table des Matières
