Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
____________________________________________EN________________________________________7
Parts or points written after the expression "WARNING!" and/or written in bold type contain
important information or recommendation and it is indispensable to take them into consideration and
to comply with them.
Package content
2.5.
The appliance is transported in carton box with internal protective elements.
The package contains the following:
Installation, usage and maintenance manual
Flexible conduit to discharge condensate water
Feet fixing
Drill frame
Wire installation rubber
2.6.
Transport and handling
During product delivery, please check that there is no visible damage
on the external part of packaging. If the product seems to be damaged,
please turn to the delivery company with your complaint in no delay.
Similar to all equipment containing a compressor, the heat pump
must be stored and transported only in a standing position (see Figure
1.5.-1.)
WARNING!
The appliance must be transported, handled or stored in a vertical
position and it must not be inclined more than 45° (Figure 1.5.-2.). This
appliance is very heavy, it needs to be carried by 2 or more persons,
otherwise it might cause personal injury or appliance damage. If during any
of the operations above, the placement of the appliance needs to be
different from the recommended position, before the first start up of the
appliance, please wait at least 3 hours starting from the time when the
appliance has been put into the proper vertical position and / or into
operation. This way, it is ensured that the lubricating oil working within the
cooling circuit is placed properly and compressor damage is avoided.
The packaged appliance can be handled by hand or by lift truck –
please follow the instructions printed on the carton box.
It is recommended to keep the appliance in the original packaging until it is
installed on the selected place, if possible, especially when construction
work is performed on the site.
During the removal of the package, please check that the appliance is intact
and all necessary parts are placed in the package. In case of any deficiency or missing parts, please
notify the contracted distributor within the deadline defined by law.
WARNING!
Due to potential danger, please keep packaging material (clips, plastic sacks,
polystyrene foam) away from children.
During handling or transportation of the appliance after its first start up, please keep warnings
on maximum inclination angle described above and ensure that all water has been discharged from
the tank. If the original packaging no longer exists, please provide protection to the appliance and its
parts similar to the original packaging.
3.
TECHNICAL FEATURES
Construction features
3.1.
HB300 heat pump water heater is basically composed of an upper part (Figure 2.7.-1.)
containing heat pump equipment and a lower part (Figure 2.7.-2.) containing the storage tank. The
storage tank of the sanitary hot water- having a volume of – is covered by an enamel coating
1 item
1 item
3 items
1 item
1 item
Figure 1.5.-1.
Figure 1.5.-2.
Publicité
Chapitres
Table des Matières
