Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
____________________________________________EN________________________________________6
Pipe coal
Corrosion protection
Active anode maintenance
Built-in controller
Electric wiring
Protection degree
Touch protection to be applied
It can be connected to electric system supplied with protective earthing as defined in
Regulations on the product:
Storage and transportation requirements
Quality certification
Quality
Socoda Group as distributor company hereby certifies that the appliance comply with the technical
features described in the quality certification label.
2.2.
Application area
The appliance produces domestic hot water or hot water of similar usage at temperature under
the boiling point. For this aim, the appliance must be hydraulically connected to the domestic water
pipeline. Electric current is also required for the operation of the appliance. The usage of air ducts is
optional and it will be described later in details.
It is forbidden to use the appliance for purposes other than the pre-defined ones. Any other
usage of the appliance is considered to be improper and therefore forbidden. The appliance must not
be used especially in environments exposed to industrial cycles and / or corrosive or explosive
materials.
The manufacturer and distributor shall take no responsibility for damages raised by inefficient
installation, improper or wrong usage, rationally not foreseen usage or incomplete or careless
compliance of manual instructions.
2.3.
Instructions and technical norms
Persons with reduced physical, perceptive or mental abilities (including children) or persons
without complete knowledge and experience on the appliance are not permitted to use the appliance,
except for the person responsible for their safety ensures supervision or adequate information on the
operation of the appliance for them. Supervision of children is required to avoid that they play with the
appliance.
The manufacturer is responsible for ensuring that the appliance complies with all construction
guidelines, regulations and requirements effective at the time of the first commercial marketing of the
product. The constructor, user and installation technician are exclusively responsible for knowledge
and compliance of regulations on the construction, installation, operation and maintenance of the
appliance in their competency areas. References on laws, requirements of technical descriptions
used in this manual are for information only. Newly implemented laws or modifications of efficient
laws shall not be legally binding for the manufacturer against third persons in any way.
2.4.
Explanation of applied symbols
Concerning putting into operation of appliance and operation safety of the appliance, the
following symbols are used in order to underline the importance of warnings of danger:
Failure to observe a warning may result in serious injury or in death, in some cases.
Failure to observe a warning may result in serious injury or damage in the building,
in the plants or in the animals.
Compulsory compliance with general and specific safety instructions of the product.
Electric heating and temperature controlling
CE, NF Performance Cat.2 indication, CPT
Table 2.10.-1.
Enamelled steel pipe
Enamel + active anode
Anode consumption display
device
Fixed
IPX1
Touch protection class I.
IEC 6036
EN 60335-1
EN 60335-2-21
EN 14511-3
EN 16147:2011
IEC 721-3-1 IE12
IEC 721-3-2 IE22
Ist class
.
Publicité
Chapitres
Table des Matières
