Fisher & Paykel CG122 Instructions D'installation Et Guide D'utilisation page 31

Cleaning chart
Cooktop part
Grates, burner caps
Burner parts
Control knobs
Stainless steel base
Ignitors
Probe
Cleaning
Hot soapy water and nylon scourer.
Soak removeable parts in a solution
of biological clothes-washing
detergent.
Mild abrasive cream cleaners.
Fume-free or heavy-duty oven cleaners
(follow manufacturer's instructions).
Hot soapy water.
To clear the holes use a stiff nylon
brush or wire eg straight-ended paper
clip.
Mild abrasive cream cleaners.
Hot soapy water and a soft cloth.
Soak stains under a hot soapy cloth,
rinse and dry thoroughly.
Hard water spots can be removed with
household white vinegar.
Non-abrasive stainless steel cleaners.
Regular use of a stainless steel polish
will reduce fingerprints and other
marks.
Heavy soiling can be removed with
fume-free or heavy-duty oven cleaner
(follow manufacturer's instructions).
Toothbrush and rubbing alcohol.
Toothbrush and rubbing alcohol..
Care and cleaning
Important
Always allow cooktop parts to
cool completely before cleaning
them.
Always apply minimal pressure
with abrasive cleaners.
Clean spills regularly before they
become burnt on.
Reassemble the burner parts
correctly.
Never use harsh/abrasive
cleaning agents as they will
damage the stainless steel
finish.
Chlorine or chlorine compounds
in some cleaners are corrosive to
stainless steel and may damage
the appearance of your cooktop.
Check the label on the cleaner
before using.
The graphics are silk-screen
printed and will not rub off.
A dirty or wet ignitor will
prevent the burner lighting
efficiently.
A dirty probe may
prevent the safety valve from
working effectively.
29
US CA