Controlled Cold - Fisher & Paykel WL37T26D Instructions D'installation Et Guide De L'utilisateur

controlled cold

The temperature of cold water varies widely, depending on your location and the season. The
lower the water temperature, the less effective the wash becomes. To help with this issue we
have developed Controlled Cold. This adds a small amount of warm water, when necessary, to
raise your cold water wash to 68°F (20°C). This will ensure that you receive the most effective
wash in cold water.
Enter Option Adjustment mode (refer to page 28).
1
Select COLD wash temperature.
2
The wash cycle buttons show the temperature adjustment possible.
3
When the REGULAR cycle light is on, the machine will fill with cold water only.
4
Press the SHEETS cycle button and your AquaSmart™ will control the temperature to
5
approximately 68°F (20°C).
Note: If you always use cold or controlled cold water, we recommend that a warm or hot wash is
used regularly, eg. every 5th wash should be at least a warm one.
changing pre-set options
Fig.17 Select Cold Wash temperature
29
EN