Safety Instructions - Reloop Digital Jockey 2 Master Edition Mode D'emploi

CAUTION! For your own safety, please read this operation manual carefully before initial operati-
on! All persons involved in the installation, setting-up, operation, maintenance and service of this
device must be appropriately qualified and observe this operation manual in detail. This product
complies with the requirements of the applicable European and national regulations. Conformity
has been proven. The respective statements and documents are deposited at the manufacturer.
INdEx
- Safety Instructions ........................................................ 18
- 1. Designation .................................................................. 20
- 2. First Steps / ASIO Driver Installation .................... 22
- 3. Traktor LE Installation .............................................. 23
- 4. Peripheral Connections ............................................ 23
- 5. Operation ..................................................................... 24
- 6. Stand Alone / Software Operation ......................... 28
- 7. MIDI Control Values.................................................... 29
- 8. Technical Specifications ........................................... 31
- 9. Minimum System Requirements ............................. 32
- 10. Support & Download ................................................ 32
Congratulations on purchasing the digital Jockey 2 Master Edition. Thank you for placing your
trust in our disc jockey technology. Before operating this equipment we ask you to carefully study
and observe all instructions.
Please remove the Digital Jockey 2 Master Edition from its packaging. Before initial operation ple-
ase make sure that the device has not been visibly damaged during transport. If you detect any
damage to the power cable or the casing, do not operate the device and contact your specialised
dealer. In order to protect the Digital Jockey the device has been supplied with a protective foil.
Please remove this foil before initial operation.

SAFETY INSTRUCTIONS

manual excludes any warranty claims. The manufacturer is not liable for any damage to property
or for personal injury caused by improper handling or non-observance of the safety instructions.
-
-
-
-
-
-
-
-
-
-
-
-
-
-
18
This device has left the factory in perfect condition. To maintain this condition and to ensure a
risk-free operation, the user must observe the safety instructions and warnings contained in this
operation manual.
For reasons of safety and certification (CE) the unauthorised conversion and/or modification of
the device is prohibited. Please note that in the event of damage caused by the manual modifi-
cation to this device any warranty claims are excluded.
The inside of the device does not contain any parts which require maintenance, with the excep-
tion of wear parts that can be exchanged from the outside. Only qualified staff must carry out
maintenance, otherwise warranty does not apply!
The fuse must exclusively be exchanged against fuses of the same class, with the same trigger
features and nominal current rating.
Make sure that the power will only be supplied after the device has been fully set up. Always plug
in the mains plug last. Ensure that the mains switch is in the "OFF" position when connecting the
device to power.
Only use cables that comply with regulations. Observe that all jacks and bushes are tightened
and correctly hooked up. Refer to your dealer if you have any questions.
Ensure that when setting up the product the mains cable is not squashed or damaged by sharp
edges.
Prevent the mains cable from coming into contact with other cables! Exercise great care when
handling mains cables and connections. Never touch these parts with wet hands!
Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to
be used is a supply outlet in accordance with specifications of the public supply network.
Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to
hold the mains plug by the body. Never pull the mains cord!
Position the device on a horizontal and stable low-flame base.
Avoid any concussions or violent impact when installing or operating the device.
When selecting the location of installation make sure that the device is not exposed to excessive
heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your own
safety and that of others!
Do not rest any containers filled with liquid that could easily spill onto the device or in its imme-
diate vicinity. If, however, fluids should access the inside of the device, immediately disconnect
the mains plug. Have the device checked by a qualified service technician before re-use. Damage
caused by fluids inside the device is excluded from the warranty.
CAUTION! Please exercise particular caution when
handling 240 V power voltage. This voltage rating
may lead to a critical electrical shock! Any dama-
ge caused by the non-observance of this operation