Gigahertz Solutions FF3 Mode D'emploi page 9

FF3, FF6, FF6E
Sockets, switches, LEDs
FF6E shown
© Gigahertz Solutions GmbH
.English.
Functional elements on left
hand side of Filter
12 – 15 Volt: Socket for con-
necting to charger unit. For long
term monitoring power from the
charger may be used.
FF6E only)
LED „Low Batt": Indicates low
battery voltage
ments no longer guaranteed, „Auto-
Power-Off" will switch off after about 2
minutes)
LED „Charge": Indicates charg-
ing of the accumulator.
Switch „Auto": If connected to
the HF-Analysers
HF58B, HF58B-r,
Gigahertz Solutions „On" and
„Off" will be automatically con-
trolled, for all other meters
"Auto" means "off".
Switch „On": For operation with
instruments without
power supply (e.g. HF35C /
HF38B): "Auto-Power-Off" is de-
activated.
Switch „On/APO": Same as
„On", however with „Auto-Power-
Off" activated.
Socket „RF in": For connecting
the antenna.
Revision 1.7 (05/09)
M a d e in G e r m a n y
(FF6 and
(reliable measure-
HFE35C,
HF59B of
remote
9