Using The Remote Controls - Yamaha R-S700 Mode D'emploi

■ Yamaha CD player controls
The following buttons can be used to control a Yamaha
CD player when CD is selected as the input source for
Zone 2.
A Yamaha CD player control buttons
• s Stops playback
• e Pauses playback
• p Starts playback
• DISC SKIP Skips to the next disc in a CD changer

Using the remote controls

■ Installing batteries
■ Replacing the battery in the Zone 2
remote control
Change the battery when the operation range of the Zone 2
remote control decreases.
CR2025 battery
AAA, R03, UM-4 batteries
Straight pin
• b Skips backward
• a Skips forward
• Ejects the disc
• w Rewinds playback
• f Fast-forwards playback
Note
Not all Yamaha CD players can be controlled by the Zone 2
remote control.
■ Operation range
The remote controls transmit a directional infrared beam.
Be sure to aim the remote controls directly at the remote
control sensor on the front panel of this unit or on the
infrared signal receiver in Zone 2 during operation.
CONTROLS AND FUNCTIONS
Approximately
6 m (20 ft)
Remote control or Zone 2
remote control
11
En