Emptying The Dust Container; Cleaning The Housing; Spare Parts - Dirt Devil Akku Blitz Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

3 Maintenance
3
Maintenance
WARNING:
Switch off the appliance before cleaning it.

3.1 Emptying the dust container

Empty the dust containers regularly.
Proceed as follows to do this:
1. Grasp the dust container by the handle
and pull it up out of the appliance (Fig. 6).
Do not press the release button yet.
2. To empty the dust container, hold it low
over a dustbin with the bottom side down.
3. Push the release button (Fig. 7/1). The
bottom (Fig. 7/2) opens, and the dust
drops into the dustbin.
4. Carefully tap out the remaining dust.
5. Fold the bottom plate back up.
6. Reinsert the dust container into the brush
base.
7. Repeat this procedure for the second dust
container.

3.2 Cleaning the housing

ATTENTION:
Do not use cleaning or scouring agents or
alcohol, as these might damage the appli-
ance housing.
Clean the outside of the housing using a
slightly damp cloth only.
3.3 Cleaning the rotary brushes
Clean the rotary brushes regularly. Pro-
ceed as follows to do this:
1. Open the visor (Fig. 8).
2. Remove hair, lint, etc. by hand.
3. If this proves insufficient for stubborn dirt,
you may use a pair of scissors. Use the
scissors with caution, taking care not to
cut off any bristles.
NOTE:
Better still, avoid stubborn dirt collecting on
the brushes by cleaning them more often by
hand.
4. Repeat this procedure for the second dust
container.

3.4 Spare parts

Accessory parts and spare parts can be reor-
dered. You can get these:
at the dirt devil online shop at
www.dirtdevil.de
or from
Zpage 48, „International Service"
13

Publicité

Table des Matières
loading

Table des Matières