V.ORLANDI E 40 Serie Instructions De Montage, D'utilisation Et D'entretien page 45

INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS INSTALLATION, OPERATING AND MAINTENANCE INSTRUCTIONS
18e
ATTENTION: Always ensure that the coupling operation is carried out
properly; check that the operation handle (22A/22B) is down and that
the security pin is fully seated in order to guarantee a secure blocking
down of the coupling pin (14).
ATTENTION: In case the coupling would not close perfectly move the
truck back and forth about 50 cm to assist the drawbar eye to find the
right position and make the coupling close.
If the coupling will not close perfectly it is absolutely forbidden to travel.
Contact the closest workshop for the solution.
DRAWBAR COUPLING E 40
13
OK
18e
PAG.
13/32
CHAP . 3
REV. 00
NO
22a 22b