Connecting - Yamaha YRS-2100 Mode D'emploi

1
As described in step 1 (☞p. 29) of "Playing
back iPod/iPhone", connect the Bluetooth
Wireless Audio Receiver (optional YBA-10)
to DOCK terminal.
2
Press DOCK key to set the input to
DOCK.
3
Turn on the Bluetooth component you
want to pair with, and then enter pairing
2)
state.
4
Press OPTION key.
Option menu for DOCK input appears in the display.
5
Select "Pairing" by pressing
key and press ENTER key.
"Searching..." appears on the display when the Bluetooth
connection is initiated.
6
Check that the Bluetooth components
recognize the Bluetooth Wireless Audio
Receiver.
If the Bluetooth component detects the Yamaha Bluetooth
wireless audio receiver, the audio receiver name ("YBA-10
YAMAHA", for example) appears in the device list of the
Bluetooth component.
7
Select the Bluetooth Wireless Audio
Receiver from the component list of the
Bluetooth components and input "0000"
for password of the Bluetooth.
y
1)
For details, refer to the manual supplied with YBA-10.
y
2)
Refer to the manual of your Bluetooth component for details.
y
3)
To cancel pairing, press RETURN key.
1)
/
3)
4)

Connecting

1
Press DOCK key to set the input to
DOCK.
2
Press OPTION key.
3
Select "Connect" and press
5)
key.
4
To disconnect the Bluetooth Wireless
Audio Receiver from the Bluetooth
component, press
display option menu, select "Disconnect",
and press ENTER key.
y
4)
When establishing the Bluetooth connection from this unit, it is only
possible to connect to the most recently connected Bluetooth component.
y
5)
• For details of messages, refer to "Bluetooth (☞p. 45)" in
"Troubleshooting".
• If you want to establish a connection with a Bluetooth other than the
one most recently connected, initiate the connection from that
Bluetooth component. Refer to the manual of your Bluetooth
component for details.
Playback features
ENTER
OPTION key again to
31
En