Joerns Healthcare Oxford Elevate Manuel De L'utilisateur Et Garantie page 6

Oxford
®
Elevate
1.
Tighten the mast assembly with the mast-locking device, which is located at the front of the chassis.
2.
Turn the locking knob until hand tight.
3.
Line the handle assembly up to the mast, and attach using the fasteners provided (these can be
found in the mast). The wrench needed to attach the handle is kept in the user instruction
wallet for safe keeping.
CAUTION: Ensure that the handle is secure and in place prior to using lift.
4.
Fit power pack to the lift and make sure the latch holding the pack in place is fully engaged.
"Click" in place.
6
294000.10065 Rev. B
E ng lish