Télécharger Imprimer la page

Joerns Healthcare Oxford Elevate Manuel De L'utilisateur Et Garantie page 10

Publicité

Les langues disponibles

Les langues disponibles

Oxford
®
Elevate
Standing Sling
Place the sling down behind patient's back between base of shoulder blades and bottom of rib
cage. Attach the support straps around the front of the patient. This strap need not be tight. It is
there to hold the sling in position whilst attaching the sling to the Standaid. It may be left off
altogether if preferred. Ensure that the patient's arms are outside the sling.
NOTE: For detailed fitting instructions, please refer to the user guide supplied with each sling.
Joerns Healthcare recommends that slings be checked regularly and particularly before
use for signs of fraying or damage. DO NOT use slings that are worn or damaged.
OXFORD RECOMMENDS THE USE OF GENUINE OXFORD PARTS. Oxford sling and lift
products are designed to be compatible with one another. For country specific guidance on
sling use and compatibility, please refer to the sling label or contact your local market
distributor or Joerns Healthcare.
Refer to maximum weight capacity of lift. Sling capacity is limited by the maximum
capacity of the lift.
10
294000.10065 Rev. B
Attachment Loop Straps
Chest Support
WARNING
WARNING
WARNING
E ng lish

Publicité

loading