Publicité
Les langues disponibles
Les langues disponibles
Calling
Calling from the telephone book
The telephone book can save a maximum of 100 entries, which are automatically placed in alphabeti-
cal order.
F
In the idle state, press the arrow key
F
Select the desired name
A
Press the handset button to dial immediately.
Calling from the caller list
B
When you press the info button
a list of calls that have not been accepted will be displayed.
You can see the call numbers in the caller list and call up the corresponding details (e.g. call time).
B
Press the info button in the idle state.
F
Select the desired call number.
A
Press the handset button to dial immediately.
Accepting calls
During the call you can...
D
... Reject the call using the
Reject
A
Press the handset button to accept the call.
Putting a conversation on hold
You are in the middle of a conversation.
r
Press the signal button. The conversation is put on hold.
Getting back to a held conversation
r
Press the signal button. You will be reconnected with the person on the other end of the
phone.
16
.
softkey (if so, caller hears busy tone).
Calling
Accept call waiting
If you receive another call during a connection, you will hear a call waiting signal. You accept the call
as follows.
r
Press the signal button. The active call is put on hold.
or
A
Press the handset button. The waiting call is accepted, the first connection is separated.
Calling another contact during a conversation
Making a query call
You are in the middle of a conversation.
r
Press the signal button – the first conversation is put on hold.
t
Enter the call number with the number buttons and finish it with
To end the query, and to return to the held connection:
E
Press
Options
.
F
Select
.
Disconnect
E
Press
OK
. You will be reconnected with the person you were originally speaking to.
Note
When entering the call number, if you do not press any buttons for 4 seconds, the number you have
entered up until that point will be dialed. Subsequent dialing is not possible.
If you disconnect the query conversation with the handset button
appears again using a call-back function, as long as the participant has not already hung up.
During the query: Toggle
If the connection is achieved, you can use the signal button
in the conversations as you choose (toggle).
r
The conversation that is currently on hold will be activated, and the other conversation put on
hold.
#
(or wait 4 sec).
A
, the held conversation
r
to talk to either of the other people
17
Publicité
