Q: Wireless Multiple Flash Shooting With Manual Flash Output - Canon Speedlite 600EX-RT Mode D'emploi

Masquer les pouces Voir aussi pour Speedlite 600EX-RT:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

q: Wireless Multiple Flash Shooting with Manual Flash Output

This describes wireless (multiple flash) shooting using manual flash.
You can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
When ALL <_> is set, set A, B or C as the firing group for the
slave units.
To fire multiple slave units with the same flash output, select ALL
<_> in step 2.
88
Set the flash mode to <q>.
1
Set the number of firing groups.
2
While <M> is displayed, press
function button 2 <T> and set
the groups to fire.
The setting changes as follows each
time you press the button:
ALL (_) →
A/B (%) →
A/B/C (]).
Select a firing group.
3
Press function button 3 <F>,
turn <9> and select the group for
which you want to set the flash
output.
Set the flash output.
4
Press function button 3 <1>.
Turn <9> to set the flash output,
and press the <8> button.
Repeat steps 3 and 4 to set the flash
output of all groups.
Take the picture.
5
Each group fires at the set flash ratio.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Speedlite 600ex

Table des Matières