Messages De Retour De La Commande Get_Network_Settings - HP Remote Insight Lights-Out Edition RILOE II Manuel De L'utilisateur

Messages de retour de la commande
GET_NETWORK_SETTINGS
Un message de retour possible pour la commande
GET_NETWORK_SETTINGS inclut les informations suivantes :
<GET_NETWORK_SETTINGS
/>
Voici un exemple de requête infructueuse :
<RESPONSE
SPEED_AUTOSELECT="YES"
NIC_SPEED="100"
FULL_DUPLEX="NO"
DHCP_ENABLE="YES"
DHCP_GATEWAY="YES"
DHCP_DNS_SERVER="YES"
DHCP_STATIC_ROUTE="YES"
DHCP_WINS_SERVER="YES"
REG_WINS_SERVER="YES"
IP_ADDRESS="111.111.111.111"
SUBNET_MASK="255.255.255.0"
GATEWAY_IP_ADDRESS="111.111.111.1"
DNS_NAME="test"
DOMAIN_NAME="test.com"
PRIM_DNS_SERVER="111.111.111.242"
SEC_DNS_SERVER="111.111.111.242"
TER_DNS_SERVER="111.111.111.242"
PRIM_WINS_SERVER="111.111.111.246"
SEC_WINS_SERVER="111.111.111.247"
STATIC_ROUTE_1 DEST="0.0.0.0" GATEWAY="0.0.0.0"
STATIC_ROUTE_2 DEST="0.0.0.0" GATEWAY="0.0.0.0"
STATIC_ROUTE_3 DEST="0.0.0.0" GATEWAY="0.0.0.0"
WEB_AGENT_IP_ADDRESS=""
STATUS = "0x0001"
MSG = "Error Message"/>
Langage de commande Remote Insight 239