Bestron APZ400 Mode D'emploi page 30

OPERATION - General
The appliance is intended only for domestic use, not for professional use.
6
1. On-/Off switch with indicator light
2. Infinitely adjustable temperature knob
3. READY-light (top and bottom heat)
OPERATION - Before first use
1. Remove the packaging.
2. Clean the baking plates to remove any residues that may be left from the manufacturing process (see
"Cleaning and maintenance"). Dry them thoroughly.
3. Put the plug into the wall socket and allow the appliance to heat up. This will take about 5 minutes;
allowing it to heat will remove any packaging odour from the appliance.
WARNING:
• The appliance may emit a little smoke and a characteristic smell when you switch it on for the first time.
This is normal, and will soon stop. Make sure the appliance has sufficient ventilation.
• Keep house birds away from the appliance when it is in use. Fumes released from the non-stick coating
when the baking plates are hot may be harmful to birds.
OPERATION - Use of pizza oven
1. Insert the plug (6) into the wall socket and switch on the oven with the On/Off switch (1).
2. Open the lid (4) with the handle (5).
3. Clean the oven (see 'Cleaning and maintenance').
4. Close the lid.
5. Turn the temperature knob (2) to the desired position. The READY-light (3) will be switched on.
Position 1
Position 2
Position 3
6. After warming up (approx. 7 minutes), the READY-light will switch off and the oven is ready to use.
7. Open the lid.
8. Place the pizza or other food in the oven.
9. Close the lid. Prepare delicious frozen and fresh pizza (Ø 27cm) in about 10 minutes.
10. Remove the pizza or other food from the oven when it is ready.
4
2
4. Lid
5. Handle
6. Cable and plug
Approx. 100º Celsius
Approx. 150º Celsius
Approx. 230º Celsius
30
5
1
3
EN