Display Indications And Symbols - VOLTCRAFT LCR-100 Mode D'emploi

8. Display indications and symbols

This is a list of all possible symbols and statements on the DMM.
AUTO Automatic range selection is active
MANU Manual range selection is active
RANGE Button for switching the measuring range selection (only in auto range)
HOLD Data hold function is activated
OL Overload, the measuring range was exceeded
OFF Off position. The DMM is switched off.
Symbol for battery change
Symbol for the diode test
Symbol for the acoustic continuity tester
Symbol for active automatic cut-off (auto power off)
Symbol for display illumination
AC Alternating quantity for voltage
DC Identical magnitude for current
V Volt (unit of electric potential)
Z Ohm (unit of electric resistance)
kΩ Kilo Ohm (exp.3)
MΩ Mega Ohm (exp.6)
nF Nanofarad (unit of electric capacity, exp.-9, symbol )
µF Microfarad (exp.-6)
mF Millifarad (exp.-3)
mH Milli-Henry (exp.-3)
H Henry (unit of electric inductivity)
MAX Maximum value display
MIN Minimum value display
25