Sony BRAVIA VPL-VW70 Mode D'emploi page 22

Tips
• You can select the desired language for the menu screen. For details, refer to "Step 4: Selecting
the Menu Language". (1 page 27)
• When "Auto Input Search" is set to "On" in the Function
effective signals is automatically displayed by pressing INPUT. (1 page 55)
22
GB
Flashes in green for
a while (tens of
seconds) and then
lights in green.
2
Press the / (on/standby)
? 1
switch to turn on the projector.
The lens protector will open.
The ON/STANDBY indicator flashes
in green, and then lights in green.
When the ON/STANDBY indicator
flashes, "Starting..." appears on the
screen.
3
Turn on the equipment
connected to the projector.
Refer to the operating instructions of
the connected equipment.
4
Press INPUT to project the
picture on the screen.
Each time you press the button, the
input indication and equipment to be
projected change. (1 page 29)
menu, the input terminal with
5
Adjust the picture position.
Press the LENS button repeatedly until
the Lens Shift adjustment window (test
pattern) appears. Then adjust the
proper position by pressing the M/m/
</, buttons. Each time you press
the LENS button, the LENS adjustment
window appears in order.