Sony Handycam HDR-TD10 Mode D'emploi page 32

Tips

When the 2D/3D switch is set to 3D, only 3D movies are played back. When the switch is set to 2D, both

3D and 2D images are played back in 2D.
You can view 3D movies in 2D by pressing 2D/3D DISP (p. 26).

Operating the camcorder while playing a movie
You can use the functions shown in the figure below while the camcorder is playing a movie.
Volume adjustment
To fast-reverse *
These buttons can be used only when the camcorder is playing a movie.
*

Notes
You may not be able to play back the images with other devices than camcorder.

Tips

The above figure appears also when you select [

Type button on the Even Index screen (2D only).
Touching on the playback screen displays functions you can currently use, and allows you to use those

functions easily.
When playback from the selected image reaches the last image, the screen returns to the INDEX screen.

Touch /

As you repeat touching

about 10 times  about 30 times  about 60 times.
The recording date, time, and shooting conditions are recorded automatically during recording. This

information is not displayed during recording, but you can display it during playback by touching
(MENU)  [Setup]  [
.
In the default setting, a protected demonstration movie is pre-recorded.

To adjust the sound volume of movies
While playing back movies, touch
US

Delete
Context
To stop *
Previous
during pause to play back movies slowly.
during playback, movies are played as fast as about 5 times 
/
Playback Settings)]  [Data Code]  a desired setting 
(
MOVIE/PHOTO] by touching the Switch Image
 adjust with
Next
To fast-forward *
To pause * /play
/ .

