Kenwood NX-5000 Serie Guide De L'utilisateur page 22

N [ ] key
Press to activate its programmable function. The default key setting
is [None].
O [ ] key
Press to activate its programmable function. The default key setting
is [Clear].
P Keypad (Full key model only)
Press the keys on the keypad to send DTMF tones. The keypad keys
can also be programmed with secondary functions if a programmable
function key is programmed as Function.
Q A/ B/ C key (Standard key model only)
Press to activate its programmable function.
R Universal connector
Connect the (optional) speaker/ microphone here.
Otherwise, keep the supplied cap in place.
For details on programming functions to the keys on your
transceiver, please contact your dealer or refer to the
instruction manual available from the following URL.
http://manual2.jvckenwood.com/en_contents/search/
20