Pioneer MRX-5 Mode D'emploi page 5

0 Be sure to connect the AC adapter to
the unit first, and then connect the
power cord to the outlet. When
disconnecting the power cord, be sure
to press and hold STANDBY/ON for at
least 3 seconds to switch the power of
this unit to standby in advance, and
always disconnect the outlet side first.
0 When the unit is in standby, you can
also press INPUT on the front of the
main unit to turn the power on.
0 Do not use any power cord or AC
adapter other than the supplied ones.
This may cause a fire or electrical
shock.
0 The supplied power cord and AC
adapter are designed specifically for
the unit. Do not use them for other
devices. This may cause a fire or
electrical shock.
EN
5