Pioneer MRX-5 Mode D'emploi page 24

Initializing the unit (the settings are
∫
initialized)
When you initialize, network settings and pairing
information will also be initialized, so we
recommend that you note down your settings
before initializing.
1
While the power is on, press STANDBY/ON
while pressing INPUT.
0 The indicators go out and the unit is
initialized.
If the power goes off suddenly
∫
The power may turn off suddenly when the
protection circuit in the unit functions. If this
occurs, unplug the power cord, then reconnect
and turn the unit on again. If the power turns off
repeatedly, unplug the power cord and contact
the place of purchase.
When the unit is operating on the
∫
battery, even after it enters standby, the
battery drains fast (MRX-5 only)
The unit consumes battery power even in
standby. To minimize the consumption in
EN
24