Menu Operations - JVC KD-R531 Manuel D'instructions

Menu operations

Menu operations
1
(Hold)
If no operation is done for about 60 seconds, the
operation will be canceled.
2
Menu item
DEMO
CLOCK SET
24H/12H
CLOCK ADJ *1
(Clock
adjustment)
DIMMER SET
BRIGHTNESS *3
SCROLL *4
TAG DISPLAY
PRO EQ
*1 Takes effect only when clock data is received.
*2 The illumination control lead connection is required. (See "Installation/Connection Manual".)
This setting may not work correctly on some vehicles (particularly on those having a control
dial for dimming). In this case, change the setting to other than <DIMMER AUTO>.
*3 Initial: DAY (BUTTON ZONE [25], DISP ZONE [31])/NIGHT (BUTTON ZONE [9], DISP ZONE [12])
*4 Some characters or symbols will not be shown correctly (or will be blanked) on the display.
12 | ENGLISH
Selectable setting (Initial: [XX])
For settings, page 4.
[AUTO]: The built-in clock is synchronized with the clock data received
from the FM Radio Data System station.
OFF: Cancels.
Selects the display and button illumination adjusted in the <BRIGHTNESS>
setting.
[AUTO]: Changes between the Day and Night adjustments when you turn
off/on the car headlights. *2
ON: Selects the Night adjustments.
OFF: Selects the Day adjustments.
DAY/NIGHT: Brightness settings for the display and button illumination for
day and night.
BUTTON ZONE/DISP ZONE: Sets the brightness levels 00 — 31.
[ONCE]: Scrolls the display information once.
AUTO: Repeats scrolling (at 5-second intervals).
OFF: Cancels.
[ON]: Shows the TAG information while playing MP3/WMA tracks.
OFF: Cancels.
For settings, page 11.
3 Repeat step 2 if necessary.
To return to the previous menu, press
To exit from the menu, press DISP or MENU.
.